Coal Fired Generation Unit (Stage 2 Unit 3). Includes: NEI Parsons Tandem Compound Reaction Turbine, 200 Megawatt, 3,000RPM Turbine Assembly, Multibar CuNi Tubed Condenser - NEI Parsons Generator, Frame Size 2F/50/120, Stator Winding, Liquid Cooled Stator Core and Rotor, Hydrogen Cooled, 200MW, 16,500 volts, 0.8 P.F, 8,748 Amperes, 50 Cycles, 3,000RPM, Hydrogen Pressure: 30PSI, 98.34% efficiency at M.C.R., 154 Tons Star Core & Windings heaviest lift, Stator Rewound in 1998 to ABB design - ASEA OFW Main Transformer, 225,000kVa, 230kV/16.5kV, 3-phase, 50Hz, Star Delta, Vector Yd1, On Load Tap Changer Wilson Electric Auxiliary OFW Transformer, 18000 kVa, 15.6kV/6.6kV, 3-phase, 50Hz, Delta Star, VectoryDy11 - Babcock and Wilcox design Boiler, pulverized fuel firing, radiant furnace, tangent tube wall, single steam drum, natural circulation, with super heater, economizer, three tubular air heaters and three electrostatic dust precipitators - C.A. Parsons Horizontal Condenser, surface tubed, double flow, two pass, single shell, 105,000 SQ FT heat transfer surface - 8x Babcock and Wilcox D.G.S. 60 (combine hammer and fan sections) Main Pulverising Mills, powered by 6x Toshiba air cooled and 2x ABB air cooled 6.6kV, 3-phase, 500kW motors, each fitted with David Brown speed reduction gear box - 2x Babcock and Wilcox HS165 Auxiliary Mills, 9.15tonnes/hour with A.E.I. 186kW, 415V, 3-phase electric motors - Babcock and Wilcox Besta Erko plate type Conveyor with scraper type spillage conveyor, nominally 42.8 tonnes per hour, Nominal 20kW, 415V, 3-phase drive motor - Various Model Steam and Water Blowers - Control Room comprised of various control units, ABB displays (IP not included) , ** Where available, we will provide drawings of all related plant. Please refer to these drawings for any additional information. Inspections for the assets will be by appointment only.
||COAL FIRED GENERATIO