Coal Fired Generation Unit (Stage 1 Unit 2). Includes: Associated Electrical Industries (A.E.I.) Tandem Compound Reaction Turbine, 200 Megawatt, 3,000 RPMTurbine Assembly, Multibular CuNi Tubed Condenser (HP and LP rotor replaced in 2010 to Alstom design HD4Ok0) - Associated Electrical Industries (A.E.I.) Generator, Model: 97/180, Stator Winding (Liquid Cooled), Stator Core and Rotor (Hydrogen Cooled), 200Mw, 16500 Volts, 0.8 P.F, 8750 Amperes, 50 Cycles, 3000RPM, Hydrogen Pressure: 206.7kPa - Peebles Power OFW Main Transformer, 425,000kVa, 300kV/19.5kV, 3-phase, 50Hz, Star Delta, Vector YNd1, On Load Tap Changer - Wilson Electric Auxiliary OFW Transformer, 18000 kVa, 15.6kV/6.6kV, 3-phase, 50Hz, Delta Star, VectoryDy11 - Babcock and Wilcox design Boiler, pulverized fuel firing, radiant furnace, tangent tube wall, single steam drum, natural circulation, with super heater, economizer, three tubular air heaters and three electrostatic dust precipitators - Thompson (Castlemaine) Horizontal Condenser, tubed, twin shell, two pass, 117,000 SQ FT total heat transfer surface - 8x Babcock and Wilcox D.G.S. 60 (combine hammer and fan sections) Main Pulverising Mills, powered by 7xToshiba air cooled and 1x ABB air cooled 6.6kV, 3-phase, 500kW motors, each fitted with David Brown speed reduction gear box - 2x Babcock and Wilcox HS165 Auxiliary Mills, 9.15tonnes/hour with A.E.I. 186kW, 415V, 3-phase electric motors - Babcock and Wilcox Besta Erko plate type Conveyor with scraper type spillage conveyor, nominally 42.8 tonnes per hour, Nominal 20kW, 415V, 3-phase drive motor - Various Model Steam and Water Blowers - Control Room comprised of various control units, ABB displays (IP not included) , ** Where available, we will provide drawings of all related plant. Please refer to these drawings for any additional information. Inspections for the assets will be by appointment only.
||COAL FIRED GENERATIO